M1 Car Reversing Camera Kit Rearview Backup Camera IP68 Waterproof

Most of the wired reversing cameras have the complex wiring problem, most of the wireless car reversing cameras have the unstable signal transmission problem. The M1 Parking Assistance System is designed with one wire easy installation and stable signal transmission. Install the reverse camera by connecting the red wire to the reversing light and black wire to ground (metal part on the car). Route the video cable from back to front.

Find a suitable place and fix the monitor on windshield or dashboard as you like. Connect monitor to the video cable and done!

Superior Quality Night Vision & Waterproof Camera. Extra low illumination of 0.1 Lux for night vision helps rear camera to perform well under the dark area with a little light. IP68 waterproof enables back camera to work well at rainy days. So it'll stand up to the heaviest rain and even some immersion. The M1 Wired reversing camera systems can the stablest picture without any wireless device interference.

Monitor Screen Size: 4.3-inches. Supply Voltage: DC10.5V-15V (12V normal). TV system: PAL or NTSC system (auto-convert). Power Mode: Automatic on when video signal received.

Image device: 1/4 inch color. Minimum illumination: 0.1 LUX. S/N ratio: More than 48db (AGC-Off). Professional customer service team will reply toyou within 2448HOURS. One Wire Easy Installation: 4.3 inch LCD rear view monitor connects a rear camera by one video cable, both the monitor & camera get power from 12V reversing light.

Clear Image and Night Vision: The M1 reversing camera systems can offer the high quality and stable picture. Low illumination of 0.1 Lux for night vision - Give you a clear picture under the dark area with a little light. NO worry about the dust or rain getting into your camera. Auto Display Rear View Vision When Reversing: This rear view monitor automatically turns on and synchronously displays the rear vision from back camera with the parking line when you're reversing.